Vercelli (VC)
Heat recovery plant from dusty and polluted gas from technological process.
Heat recovery boiler for heating of thermal oil loop (to feed a 2.2 MW electric ORC turbine) and 12 ton/h steam generation (for technological process). 12 ton/h deareator capacity and 300 m steam pipeline.
Reims (France)
Revamping of a water tube boiler for the production of superheated water. Supply of a DeNOx system SNCR type.
50 MW thermal boiler with coal furnace for the production of superheated water at 150°C.
Ravenna (RA)
Heat recovery thermal plant from exhaust gas of 6 MW electric turbogas + post-firing. Water tube Heat recovery steam generator, deareator, auxiliary natural gas steam generator.
52 ton/h at 21 bar water tube heat recovery steam generator capacity. 30 ton/h at 21 bar smoke tube auxiliary natural gas steam generator capacity. 52 ton/h deareator capacity.
Corana (PV)
Biomass plant for production of industrial heat.
Revamping of the existing thermal plant with implementation of a new Human Interface Software for management and regulation of the plant. Supply of new PLC and new power and regulation electrical plant.
Pontecchio Marconi (BO)
5,7 MWth Heat Recovery Generator from a Thermal Oxydizer burning off-gas and liquid flow from industrial process.
Water tube HRG vertical type and burner for the production of 8.600 kg/h of superheated steam at 11 bar.
Trecate (NO)
4.200.000 kcal/h Hot air generator, indirect exchange type.
Hot gas generator using hot air deriving from Sulphur dioxide process diluted with external one, made in stainless steel in vertical shape.
Klaipeda (Lithuania)
12,6 MWt Wood Thermal plant, with two-phase thermal oil with incineration of synthesis gasses used for reactors washing process.
Thermal plant with adiabatic furnace with alternative step mechanical step grate, Thermal oil recovery heat generator vertical type, comburent air pre-heater with blowing air-cleaning system.
Ragusa (RG)
Complete thermal plant for steam production from wood and vine shoots to be combined with two thermo-electrical systems of 200 kWe total production.
Thermo-electrical plant complete of automatized feeding fuel system, adiabatic furnace and exhaust treatment system.
Torre Santa Susanna (BR)
Complete Thermal plant for steam production from pomace and marc to be combined with two thermo-electrical systems of 200 kWe total production.
Thermal plant complete of automatic fuel feeding system, adiabatic furnace, water tube boiler with hammer cleaning system, exhaust treatment system, ducts and accessories for steam circuits.
Salerno (SA)
Electrical Hot water generator.
Sizing and supply of a 560 kWth Electrical Hot water generator and circuit accessories for revamping of existing plant.
Sarroch (CA)
Unfired steam generator and De-aerator.
Design and supply of an 1900 kWth unfired steam generator working on 23 barg pressure and Low pressure physical de-aerator for feeding water treatment.
Zelo Buon Persico (LO)
Power plant operating with poultry manure combustion. Total Electric Power of 185 kWel, supplied with "turn-key" formula.
Full turn-key plant, including automatic fuel feeding system, adiabatic furnace, recovery heat generator, pollutant treatment system, steam accessories, Electricity generation system with steam micro-turbine 60 kWel and 125 kWel ORC.
Ancona (AN)
No. 2 Biomass Thermal Lines, with thermal power output of 6.8 MWt.
Supply of adiabatic furnace and Thermal Oil heat generator for 1000 kW electrical and 1000 kW thermal energy production.
Casale Monferrato (AL)
Hot gas generator.
Design and supply of a 700 kW hot gas generator, including burner and fan for air dilution by 15,000 Nm3/h.
Rovereto (TN)
Supply & Assembling of a Vessel GVI.
Supply of indirect steam generator for 10,6 ton/h at 19 barg.
Rezzato (BS)
Heat recovery thermal plant (3000 kWt) from hot gas from Clinker Cooler, producing low pressure steam and bunker oil heating.
Heat recovery generator, designed for high erosive dust content, plant accessories like pumps, piping, Expansion vessel, Storage tank, Heaters and indirect steam generator.
Corana (PV)
Upgrading of the plant with an adiabatic combustion chamber, complete of a high moisture sow dust burner 3000 kWt.
Sow dust storage silo and sending system of the dust to the burner. Burner, gas ducts and mix system. Ash extraction system.
Arbizzano (VR)
Power station delivered with a full “turn-key” contract, fed with chicken manure, using thermal oil loading a CHP ORC, producing 260 kWe and thermal power for the farm district heating. The plant is complete from the fuel storage to the Chimney included.
The system involves the adiabatic furnace (1630 kWt) and a mechanical step grate. Heat recovery generator, warming thermal oil, vertical and horizontal type for a radiant and horizontal sections.
Corana (PV)
Power station of 1000 kWe, fed with biomass, using thermal oil for ORC system.
Thermal Oil Heat Recovery Generator, made of radiant and convective sections, vertical the first and horizontal the second, complete of piping and accessories, wiring, cabling, control system, and connection of an ORC, dissipative type, using cooling towers.
Milano (MI)
Full boiler house, made of n.2 steam generators fired with natural gas, delivered with “turn-key” contract.
Steam generator complete of Economizer and Low NOx (≤50 mg/Nm3) burners. 30 t/h @ 20 bar and Steam generator complete of Economizer and Low NOx (≤50 mg/Nm3) burners. 10 t/h @ 20 bar.
Coniolo (AL)
Power station delivered with a full “turn-key” contract, producing 3 MW in thermal oil, fired with poplar wood and bark, with very low Heat Calorific Value, involving all the items, from Moving Floor (storage plant) to the Chimney.
Adiabatic Furnace, complete of mechanical step grate, heat exchanger made of radiant and convective section, Air preheater, cyclones, filter, Chimney, and the smoke analysis recorder.
Coniolo (AL)
Power station delivered with a full “turn-key” contract, producing 6 MW in thermal oil, fired with poplar wood and bark, with very low Heat Calorific Value, involving all the items, from Moving Floor (storage plant) to the Chimney, complete of pipeline for the thermal olio to the users. An ORC 1 MWe CHP type is connected to the heat exchanger, producing electricity to be sold to the net.
Moving System fuel feeding and storage, Adiabatic Furnace, complete of mechanical step grate, heat exchanger made of radiant and convective section, Air preheater, cyclones, filter, Chimney, and the smoke analysis recorder.
Termoli (CB)
Full Power Plant producing 1 MWe and 1.500 kg/h of saturated steam 10 bar, fired with biomass, using Thermal Oil heat generator of 8 MWt thermal power.
Set of n.10 twin power stations producing electrical power and thermal power, through Organic Rankine Cycle.
Szekesfehevar (Hungary)
Steam Superheater and Economizer finned tube type, complete of mix de-superheater.
Steam superheater 28 t/h 30 bar 300°C heat recovery from gas turbine exhausted gas.
Catania (CT)
Heat recovery Power station fed with exhausted gas from reciprocating engines fed with slag landfill biogas, producing hot thermal oil for a 500 kWe ORC.
Complete system, also including all the gas ducts from the engines to the heat recovery generator, the heater, the piping and the dry cooler for ORC condenser.
Termoli (CB)
Superheater steam generator fired with biomass. 65 t/h 65 bar 490°C, complete of Economizer LT+HT and auxiliaries. Furnace integrated in the combustion chamber tube wall type, complete of mechanical reciprocating step grate 55 MWt.
Rankine cycle basic design and full detail engineering with Workshop drawing for the full boiler (made in 2 units in separated places). Electrical power in Rankine cycle 18 MWe.
Milano (MI)
Superheated steam generator 10 bar 360°C, heat recovery from the exhausted gas of a reciprocating gas engine.
Delivery of the steam generator as a package to be installed on the gen-set container.
Confienza (PV)
Delivery of the full thermal plant generating 1 MWe using condensing steam turbine.
Complete thermal cycle of a 1 MWe power plant fired with biomass and humid waste. The plant is complete of adiabatic furnace, heat generator (thermal oil, superheated steam and feed water), de-aerator, demineralizer, steam generator 40 bar 420°C.
Cairate (VA)
Delivery of the complete thermal system after the diesel engine, as well as all the accessories as de-aerator, storage tank, expansion vessel, piping, electrical wiring and control system. Thermal plant for the production of 8 MWe and 4,7 MWt + Absorber Chiller for production of cooling water.
Power plant made of a 8 MWe reciprocating gen-set fired with palm oil and a thermal oil heat recovery generator receiving exhausted hot gas form engine, post-fired in an external combustion. After the post-firing, a deNOx catalyst is installed before the heat exchanger, and after that an economizer, a Silencer and the Chimney.
Grassobbio (BG)
Superheated steam generator 12 t/h 52 bar 490°C fired with meat flour.
Superheated steam generator, water tube type, radiant combustion chamber, fired with meat flour and biomass.
Morocco
Basic and detail Engineering, including heat exchangers (n.2) workshop drawing, of a power plant (4 MWe) to be installed on a cement plant hot exhausted gas.
Horizontal Double body Heat exchanger, generating synthetic thermal oil. Net Thermal power 15 MWt and gas flowrate 250.000 Nm3/h of sticky dusty gas (95 g/Nm3). vertical tubes and mechanical clearing system, Vertical single body Heat exchanger, generating synthetic thermal oil. Net Thermal power 19 MWt and gas flowrate 350.000 Nm3/h of abrasive dusty gas (75 g/Nm3). Horizontal tubes and mechanical clearing system. 4 MWe Organic Rankine Cycle.
Briosco (MB)
CHP Power plant with heat recovery boiler using reciprocating engine (1600 kWe) exhausted gas.
Delivery of the Recovery steam generator, fire tube boiler 1400 kg/h max steam flow.
Matera (MT)
Basic and detail Engineering, including heat exchanger workshop drawing, of a power plant (1,5 MWe) to be installed on a cement plant hot exhausted gas, using n.2 separated heat exchangers and with n.1 dry-cooler dissipator.
Double body Heat exchanger, warming synthetic thermal oil. Net Thermal power 9,5 MWt and gas flowrate 250.000 Nm3/h of dusty gas (80 g/Nm3). Pending tube bundles and mechanical cleaning system, connected to a 1,5 MWe Organic Rankine Cycle.
Samatzai (CA)
Turn-key delivery of a Heat recovery plant complete of Thermal oil HRG using cement plant hot gas, producing heat for steam generation.
Full thermal plant with thermal oil heat recovery generator using high dust content (90 g/Nm3) gas stream (erosive type), on-line type, complete of evaporating dissipator for excess of generated power.
Monza (MB) for Egypt
N°2 Water bath heaters for petroleum fired with drill gas.
N.2 Water bath heaters fire tube type and coil heat transfer surface. 2,5 Gcal/h each, full complete of accessories.
Scafa (PE)
Up-grading of a heat recovery plant with an absorber Chiller using EC experimental project financing.
Heat recovery plant for cold water generation 55 kWfr.
Jerago con Orago (VA)
Dump Biogas treatment system for a reciprocating engine park.
Delivery of n.2 separated lines, 4000 Nm3/h each, for treatment and separation of dump biogas for reciprocating engines.
Martinsburg (USA)
Basic and detail Engineering, including heat exchanger workshop drawing, of a power plant (5 MWe) to be installed on a cement plant hot echausted gas.
Double body Heat exchanger, generating synthetic thermal oil. Net Thermal power 40 MWt and gas flowrate 650.000 Nm3/h of dusty gas (90 g/Nm3). Pending tube bundles and mechanical cleaning system, connected to a 5 MWe Organic Rankine Cycle.
Montalto di Castro (GR)
Hot gas generator fired with fuel oil 6.500.000 kcal/h fired with natural gas and LPG used for Clinker drying.
Hot gas generator, duct burner type complete of fan, control system and electrical panel base frame for elevation at +5.00 m from ground.
2007 Castelfranco (TV)
Heat recovery steam generator for animal meal incineration and slaughterhouse waste plant.
Vertical Heat recovery generator 3500 kg/h saturated steam complete of all needed accessories.
Calusco d’Adda (BG)
Turn-key delivery condition for a heat recovery plant using hot gas from Clinker Cooler of a cement plant, preheating bunker oil.
Full thermal plant with thermal oil heat recovery generator using very high dust content (80 g/Nm3) gas stream (erosive type).
Malaga (Spain)
Basic design for a power plant (5 MWe) using Organic Rankine Cycle and a Thermal Oil heat recovery generator on a cement plant flowrate.
31 MWth Heat recovery generator producing hot thermal oil for a 5 MWe ORC. The heat exchanger has been designed for a very high dust content (100 g/Nm3) flowrate generated by cement plant process. Detail engineering of the heat exchanger and its auxiliaries.
Milano (MI)
Hot gas generator fired with fuel oil 4.200.000 kcal/h.
Hot gas generator for sulphuric acid plant start-up.
Scafa (PE)
Experimental full plant with heat exchanger (turn-key formula) for heat exchanger study in dusty gas field, involving high concentration (90 g/Nm3) of abrasive and sticky dust in the heat exchange surface design.
Heat recovery system 80.000 kcal/h with special mobile heat transfer surface, and accessories, like control system, fan and dissipator.
Trezzano S/N (MI)
Heat recovery generator (Superheated water) using hot and dusty gases form glass industry plant.
N.1 Heat exchanger (superheated water) 500.000 kcal/h made in Astelloy for heat recovery under dew point temperature (SO3).
Milano for Egypt
Hot gas generator fired with fuel oil 8.200.000 kcal/h.
Hot gas generator for sulphuric acid plant start-up.
Monza (MB)
50 MWe full Power plant design.
N.2 sections of power plant, fired with waste derived fuel and biomass, using Rankine Cycle.
Trecate (MI)
Indirect gas heat exchanger 4.200.000 kcal/h fired with light oil.
Hot gas generator for sulphuric acid plant start-up pre-heater.
Conselice (FE)
Basic design of a full power plant 3x17 MWe using reciprocating engine loaded with palm oil.
N°3 diesel engines fired with palm oil, industrial waste, with heat recovery system feeding chiller and n.3 steam recovery boilers.
El-Minya (Egypt)
Basic and detail design Project for a heat recovery plant producing superheated air (process uses) and thermal oil (2,5 Gcal/h) using heat recovery generator from a dusty (abrasive and sticky), complete of dissipator and steam generator.
Full plant detail and basic design. Heat Recovery generator detail and basic design complete of accessories and auxiliary plant items.
S.Barbara (AR)
Full Boiler house producing superheated steam 20 t/h.
N°1 superheated steam boiler 260°C 16 bar complete of plant balance.
Atessa (CH)
Thermal recovery plant after a hospital waste incinerator generating electrical power using a condensing steam turbine 700 kWt in Rankine cycle.
3-section waste recovery heat generator, Thermal oil type, steam superheater and Economizer + plant balance involving steam turbine.
Gavirate (VA)
Basic design of a combined cycle (Diesel + Rankine) of a power station 10,4 MWe.
N°2 Diesel engines 5.550+3.600 kWe. Condensing steam turbine (1.300 kWe) connected to a water condenser + Water tube heat recovery boiler. Superheated steam 10 t/h 16 bar 380°C.
Vinovo (TO)
Power plant design for a Rankine cycle connected to a biomass and waste derived fuel of 13 MWe.
Design of a Rankine thermodynamic cycle. Combined to a furnace, horizontal heat recovery boiler – water tube type 65 t/h 64 bar 390/440°C + Steam Turbine 13 MWe and Air condenser.
Desio (MB)
Revamping of thermodynamic Cycle of a urban waste incinerator also involving a steam generator.
Basic design of the Rankine Cycle involving 2 furnaces and 2 water tube boilers 15 t/h 40 bar 360°C + Steam Turbine 4000 kWe.
Filago (BG)
Toxic gas incinerator plant for industrial toxic and flammable gas (Butadiene, Toluene, nitrogen, Vents) using adiabatic furnace and heat recovery system with thermal oil heat exchanger 4 MWt.
Adiabatic furnace with duct burner and 1+1 post-firing to the co-fired thermal oil heat exchanger 4 MWt.
Cuvio (VA)
Power plant with multistage condensing steam turbine 4 MWe, using low pressure saturated steam 5 bar.
AEG-Kanis steam turbine, construction year 1942, 4000 kWe, 28 t/h, 0,085 ata Condenser pressure, reinstallation and revamping with new condenser, cooling towers, and plant balance.
Sesto San Giovanni (MI)
Revamping of thermodynamic Cycle of an urban waste incinerator involving steam generator too.
Basic design of the Rankine Cycle involving 3 furnaces and 3 water tube boilers 10 t/h 42 bar 380°C + Steam Turbine 4500 kWe.
Fagnano Olona (VA)
Superheated steam heat recovery once through, water tube type, using exhausted gas from reciprocating gen-set Waukesha 600 kWe.
350 kg/h 16 bar 300°C. HRG water tube once through boiler, finned tubes.
London (GB)
By-Pass and direct ducts, Chimney, diverter and steam piping (High, Low and Medium pressure) for n.2 gas turbines 4500 kWe and connected HRG.
Ducts and cold casings made of AISI + Carbon steel Piping for superheated steam using ASTM A106Gr.B + P11. Air Condenser Tubes and headers.
Monza (MB)
High Pressure steam generator, Economizer and burner low emission guarantee.
Water tube superheated steam generator 25 t/h 76 bar 450°C.
Monza (MB)
Steam Generator, complete of Economizer and accessories (feed water pumps, burners, control panel, valves, Chimney and pipe rack).
25 t/h 15 bar water tube saturated steam generator.
Monza (MB)
Boilers Maintenance service, erection and repairing.
Open contract.
Nembro (BG)
Natural gas Pumping station with pipeline.
800 m underground pipeline 250 Sm3/h 0,5 bar.
Cuvio (VA)
Coal fly ash reinjection plant in Combustion chamber + grate ash silo storage system.
Coal fired Water tube Superheated steam boiler 65.000 kg/h; 74 bar; 450°C.
Nembro (BG)
Hot gas generator, fired with biomass using adiabatic furnace for kiln use.
Adiabatic furnace with grate 1,5+2,0 Gcal/h.
Gavirate (VA)
CHP power plant design, using reciprocating drives. District heating net detail calculation and design, for civil and industrial utilization.
Hot Water Underground net 85/60°C for 8 Gcal/h + 10 bar saturated steam net.
Milano (MI)
Toxic waste saturated steam generator.
10 t/h 12 bar fire tube boiler.
Cuvio (VA)
Thermic calculation of a Superheated steam boiler and backpressure steam cycle. Thickness test of boiler tubes and drum.
1x65.000 kg/h; 74 bar; 450°C. Coal and bunker oil, using grate and burner.
Corbetta (MI)
Air conditioning plant for commercial building.
2 Chiller of 240 kWfr + 3 condensing boilers + Air treatment plant.
Casalbuttano (CR)
“Turn-key” heat recovery plant from dye hot water.
930.000 kcal/h of dirty hot water.
Roma (RM)
Combined cycle of Gas Turbines (existing) and steam turbine (2.900 kWe) with added Rankine cycle using condensing steam turbine and heat recovery boiler.
Gas Turbine = 2x4500 kWe + Steam Turbine=1x2900 kWe + Superheated steam boiler 14 t/h once through water tubes 32 bar 430°C.
Casalbuttano (CR)
Turn-key plant for neutralization of dye black water, using smoke from steam boilers.
35 m3/h basic water pH 13 at pH 8,5.
Boltiere (BG)
Dryer system for drawn tubes, using saturated steam.
Drying time guarantee.
Città della Pieve (PG)
Heat Generator, fired with bunker oil and Natural Gas. Heat recovery system and steam generator (8.000 kg/h).
4.000.000 kcal/h.
Fagnano Olona (VA)
CHP “turn-key” plant, using 3300 kWe Bergen gen-set gas, with water tube boiler fired with natural gas and biogas, coupled with ID fan.
12.000 kg/h; 12 bar; saturated steam.
Cuvio (LC)
Hydroelectric power plant using 350 kWe Pelton turbine.
Plant repowering involving hydro turbine, penstock and automatic grate filtering, automatic parallel electric control panel and remote control system.
Giussano (MI)
External Superheater Revamping 16 t/h 32 bar + back-pressure plant balance of a Dresser-Rand Steam Turbine 600 kWe.
16.000 kg/h; 32 bar; 440°C Water tube boiler.
Cologno Monzese (MI)
Casing reconstruction and re-tubing of a saturated steam water tube boiler.
2x15,000 kg/h; 12 bar; Bunker Oil.
Vicenza (VI)
Saturated steam boiler Test and reparation.
4x3,000 kg/h.
